Electric Chain Hoist

GIS Electric Chain Hoists are manufactured in Switzerland to the highest standards of quality and technology. There hoist are ideal for many type of lifting jobs. From a safety aspect, all models have low voltage control and electrical limit switch for highest and lowest hook positions. GIS electric Chain hoists can be used in combination with slewing cranes, GIS overhead rails and cranes, and standard shop running on I-beam steel girders.

GIS Electric Chain Hoist - GP

 

GPM250, GP250 – 2500, up to 6300 kg

Reliable and long-lasting

  • Chain safety factor minimum 8-times (DIN EN 14492 A5, ISO M5)
  • Protection class IP65 as standard

Easy to operate

  • 60 % higher lifting capacity
  • Quiet running with 3-step drive and helical gearing
  • Polygon connections ensure quick assembly and disassembly

Customer specific

  • Three- or single-phase version
  • Direct control, special control, radio remote control, frequency inverter
  • Special versions such as synchronized electric chain hoist, low headroom version, corrosion resistant version, ATEX

Downloads:

GIS GP + GPM Hoist Catalogue

GP + GPM Technical Data Sheet

Explosion Proof Electric Chain Hoist - GP

 

GP250 – 2500 ATEX, up to 6300 kg

  • Electric chain hoist explosion proof ATEX version
  • Available in a dust- and gas proof execution
  • For zones 22 (D) and 2 (G)
  • Protection class IP65
  • Option: motorised trolley in ATEX version

Downloads:

GIS GP ATEX Catalogue

Corrosion Resistant Electric Chain Hoist - GPR

GPR500 + 1000, up to 1250 kg

  • Corrosion resistant electric chain hoist
  • For use in food, pharmaceutical or chemical industry, wastewater treatment plants, outdoor use
  • Housing cataphorese coated
  • Round, stainless steel chain
  • Suspension corrosion resistant
  • All parts in contact with the chain (wearing parts such as chain wheel, load hooks, screws) in corrosion resistant version
  • Protection class IP65
  • Special grease for food industry
  • Option: overpressure release valve
  • Option: manual or motorised trolley in corrosion resistant version

Downloads:

GIS GPR Catalogue

Motorised Trolley - GMF

GMF1250 – 6300, up to 6300 kg

  • Motorised trolley for steel beams
  • Side plates made of cast iron with fall and climbing protection
  • Load wheels made of cast iron, with ball bearings
  • 1 or 2 travelling speeds
  • Flange width infinitely variable
  • Control box with easily accessible connections
  • Option: travel limit switch
  • Option: radio remote control

Downloads:

GIS GMF Hoist Catalogue

Motorised Trolley corrosion resistant - GMFR

GMFR1250 + 2500, up to 1250 kg

  • ​Corrosion resistant motorised trolley for steel beams
  • Side plates cataphoresis coated with fall and climbing protection
  • Load wheels made of stainless steel
  • 1 or 2 travelling speeds
  • Spindle corrosion resistant
  • Flange width infinitely variable
  • Control box cataphoresis coated with easily accessible connections
  • Option: radio remote control

Downloads:

GIS GMFR Hoist Catalogue

Motorised trolley Frequency Controlled - GMFFU

GMFFU1250 – 6300, up to 6300 kg

  • Motorised trolley with frequency inverter
  • Basic specification like GMF 1250 – 6300
  • Transport without oscillation and precise positioning of loads
  • Soft start for high demands
  • 2 speeds are programmable: for starting / positioning and travel
  • Speed 3.6 – 30 m / min.
  • Optionally with remote control

Downloads:

GIS GMFFU Hoist Catalogue

Motorised Trolley explosion proof - GMF

GMF1250 – 6300 ATEX, up to 6300 kg

  • Explosion proof electric trolley in ATEX execution
  • Available in a dust- and gasproof execution
  • Flange width infinitely variable
  • 1 or 2 travelling speeds
  • Protection class IP65
  • Available for zones 22 (D) and 2 (G)

Downloads:

GIS GMF ATEX Hoist Catalogue

Push trolley GHF500 K

GHF500, up to 500 kg

  • Manual trolley for steel beams
  • Side plates made of die-cast aluminium with fall and climbing protection
  • Pefect smooth running thanks to glass fibre reinforced plastic wheels
  • Very low tare weight of only 2.5 kg
  • Flange width 50 – 149 mm

Downloads:

GIS GHF Catalogue

Push trolley GHF

GHF1250 – 6300, up to 6300 kg

  • Manual trolley for steel beams
  • Manual or electric chain hoist moved manually
  • Load wheels made of cast iron, with ball bearings
  • Side plates made of cast iron with fall and climbing protection
  • Flange width infinitely variable

Downloads:

GIS GHF Catalogue

Electric Chain Hoist Low Headroom version

GPK500 + 1000, up to 2000 kg

  • Solution for especially low rooms
  • Obtaining room height using a sophisticated chain guide
  • Hook position adjustable by means of a geared limit switch
  • Available with a lengthened frame for transporting large and bulky loads
  • 1 or 2 lifting speeds
  • Optionally with trolleys
  • Optionally with frequency inverter

Downloads:

GIS GPK  Catalogue

Synchronised Hoist - GPS

GPS500 + 1000, up to 2 x 2500 kg

  • Synchronised electric chain hoist for transportation of large and bulky loads
  • Precise parallel run of two hooks without twisting the load
  • 2 electric chain hoists connected electrically and mechanically
  • With temperature monitoring
  • Hook position individually adjustable by geared limit switch
  • Distance between load hooks 0.7-5.0 m
  • Perfect to combine with GISKB suspended crane or travelling crane
  • Option: with trolleys
  • Option: with frequency inverter
  • Option: customised devices for load handling

Downloads:

GIS GPS Catalogue

 

Handy chain model

GPMH250 + GPH500, up to 500 kg

  • Handy chain model for quick and easy positioning of loads
  • Control of electric chain hoist and guidance of the load with one hand
  • Control unit with rocker switch for left- and right-handed operation
  • Hook end positions adjustable by geared limit switch
  • Perfect to combine with GISKB slewing or suspended crane
  • Option: handy kit for retrofitting of GIS standard electric chain hoist
  • Option: with frequency inverter
  • Option: customised devices for load handling

Downloads:

GIS GPMH Catalogue

GIS Entertainment Hoist LPL D8 Model

LPML250 for 500 kg, LPL500 for 1000 kg, LPL1000 for 2000 kg

Light and powerful

  • The lightest entertainment chain motors in its class
  • LPML250: Self-weight 12 kg, lifting capacity 500 kg
  • LPL500: Self-weight 23 kg, lifting capacity 1000 kg
  • LPL1000: Self-weight 46 kg, lifting capacity 2000 kg

Reliable and long-lasting

  • Protection class IP65 as standard
  • Housing and cover made of aluminum

Comfortable

  • Quiet running: With 3-step drive and helical gearing
  • Easy assembly of a second brake
  • Polygonal design for an easy maintenance
  • Available as a kit with flight case and controller

Downloads:

GIS LP + LPM Hoist Catalogue

GIS Entertainment Hoist LP Model – Video

GIS Entertainment Hoist LP D8 Model

LPM250, LP500 – 2500, up to 6300 kg

Reliable and long-lasting

  • Aluminium casing and cover
  • Weatherproof: Protection class IP65 as standard

Easy to operate

  • Quiet running: with 3-step drive and helical gearing
  • Simple: Polygonal design for an easy maintenance
  • Usable as stationary or climbing hoist without modification

Customer specific

  • Different operating and control voltages
  • Easy assembly of a second brake
  • Wide range of accessories and options

Downloads:

GIS LP+LPM Hoist Catalogue

GIS Entertainment Hoist LCH Model – Video

Send Us An Enquiry

INTERLIFT provides tailored lifting equipment and solutions. Please feel free to contact INTERLIFT regarding a lifting, handling or productivity solution.

  • This field is for validation purposes and should be left unchanged.
24/7 Service Hotline Call Now Button